Bearing capacity is subtopic G of Geotechnical Engineering on the FE Civil exam. The items come in two kinds: the ultimate capacity from the Terzaghi equation with the bearing capacity factors given, and the size of a footing from its load and an allowable pressure.
The four problems below cover both, with strip footings on soil with and without cohesion, a net ultimate capacity, and the size of a square footing and of a strip footing. All four are in SI units.
Where this sits: NCEES lists Geotechnical Engineering at 10-15 questions of the 110 on the FE Civil exam, and bearing capacity is subtopic G of the area. NCEES does not publish question counts below that level.
The Bearing Relationships These Problems Use
The FE Reference Handbook gives the bearing capacity equation and a table of the factors; these problems supply \( N_c \), \( N_q \) and \( N_\gamma \).
- Terzaghi, strip footing: \( q_{ult} = cN_c + \gamma D_f N_q + \tfrac12\gamma B N_\gamma \)
- Net ultimate capacity: \( q_{net} = q_{ult} - \gamma D_f \)
- Allowable capacity: \( q_a = q_{ult}/FS \)
- Footing size: \( A = P/q_a \); a square footing has side \( B = \sqrt{A} \), a strip footing width \( B = (P/L)/q_a \)
4 Free Bearing Capacity Problems
Give yourself about three minutes for each one, roughly the pace of the exam, and work it on paper before you look at the solution.
Problem 1 — Width of a Strip Footing
A continuous wall load is \( 400\,\mathrm{kN} \) per meter of wall length. The allowable soil pressure is \( 180\,\mathrm{kPa} \). Neglect footing weight. What minimum strip footing width \( B \) is required?
Answer: B) \( 2.2\,\mathrm{m} \)
Step 1 – Identify given information: Wall load \( P = 400\,\text{kN/m} \), allowable bearing pressure \( q_a = 180\,\text{kPa} \), strip (continuous) footing.
Step 2 – Strip footing sizing formula: For a strip footing (per unit length), \( q = P/B \), so \( B = P/q_a \).
Step 3 – Solve:
$$B = \dfrac{400}{180} = 2.22 \approx 2.2\,\text{m}$$
Step 4 – Answer: \( B \approx 2.2\,\text{m} \) matches option (B). In practice, the width would be rounded up to the next convenient dimension (e.g., 2.25 m or 2.5 m) to provide a margin of safety.
Correct answer: (B)
Problem 2 — Size of a Square Footing
A column load \( P = 1800\,\mathrm{kN} \) is supported by a spread footing on soil with allowable bearing pressure \( q_a = 200\,\mathrm{kPa} \) (service). Neglect footing weight. If the footing is square, what side length is required?
Answer: A) \( 3.0\,\mathrm{m} \)
Step 1 – Identify given information: Column load \( P = 1{,}800\,\text{kN} \), allowable bearing pressure \( q_a = 200\,\text{kPa} \), square footing.
Step 2 – Footing sizing formula: \( A = \dfrac{P}{q_a} \) and for a square footing, side length \( B = \sqrt{A} \).
Step 3 – Solve:
$$A = \dfrac{1{,}800}{200} = 9\,\text{m}^2$$
$$B = \sqrt{9} = 3.0\,\text{m}$$
Step 4 – Answer: \( B = 3.0\,\text{m} \) matches option (A). Option (D) is the required AREA, \( 9\,\text{m}^2 \), reported as if it were the side; the square root is the last step and the easiest one to drop. Options (B) and (C) are larger footings that would work but are not the minimum asked for. This is the minimum size based on bearing pressure only; actual design must also check settlement and punching shear.
Correct answer: (A)
Problem 3 — Ultimate Capacity with Cohesion
A strip footing (continuous) has \( B = 2.0\,\mathrm{m} \) and is founded at \( D_f = 1.0\,\mathrm{m} \) in sand with \( c = 20\,\mathrm{kPa} \) and \( \gamma = 18\,\mathrm{kN/m}^{3} \). Use Terzaghi strip-footing equation \( q_{ult} = cN_c + \gamma D_f N_q + 0.5\gamma BN_\gamma \). For \( \phi = 30^\circ \), use \( N_c = 30 \), \( N_q = 18 \), \( N_\gamma = 22 \). What is \( q_{ult} \)?
Answer: B) \( 1.32\,\mathrm{MPa} \)
Step 1 – Identify given information:
| Footing width | \( B = 2.0\,\text{m} \) |
| Foundation depth | \( D_f = 1.0\,\text{m} \) |
| Cohesion | \( c = 20\,\text{kPa} \) |
| Unit weight | \( \gamma = 18\,\text{kN/m}^3 \) |
| Bearing capacity factors | \( N_c = 30,\; N_q = 18,\; N_\gamma = 22 \) |
Step 2 – Terzaghi strip footing equation: \( q_{ult} = cN_c + \gamma D_f N_q + 0.5\gamma B N_\gamma \)
Step 3 – Solve:
$$q_{ult} = 20(30) + 18(1)(18) + 0.5(18)(2)(22)$$
$$= 600 + 324 + 396 = 1{,}320\,\text{kPa} = 1.32\,\text{MPa}$$
Step 4 – Answer: \( q_{ult} = 1.32\,\text{MPa} \) matches option (B). The three terms represent cohesion, surcharge (overburden), and soil weight contributions to bearing capacity respectively.
Option (C) applies the square-footing factor of \( 1.3 \) to the cohesion term of what is a continuous strip footing, inflating \( 600 \) kPa to \( 780 \). Options (A) and (D) do not follow from the data. The factors \( N_c \), \( N_q \) and \( N_\gamma \) are not printed in the Handbook, which only gives the equation, so an exam question has to supply them.
Correct answer: (B)
Problem 4 — Net Ultimate Capacity in Sand
A strip footing in sand has \( B = 1.5\,\mathrm{m} \), \( D_f = 1.0\,\mathrm{m} \), \( c = 0 \), and \( \gamma = 17\,\mathrm{kN/m}^{3} \). Use Terzaghi strip equation \( q_{ult} = \gamma D_f N_q + 0.5\gamma BN_\gamma \). For this sand, use \( N_q = 14.7 \) and \( N_\gamma = 16.7 \). What is the net ultimate bearing capacity \( q_{\text{nu}} = q_{ult} - \gamma D_f \)?
Answer: A) \( 446\,\mathrm{kPa} \)
Step 1 – Identify given information:
| Footing width | \( B = 1.5\,\text{m} \) |
| Foundation depth | \( D_f = 1.0\,\text{m} \) |
| Cohesion | \( c = 0 \) (sand) |
| Unit weight | \( \gamma = 17\,\text{kN/m}^3 \) |
| Bearing capacity factors | \( N_q = 14.7,\; N_\gamma = 16.7 \) |
Step 2 – Terzaghi strip equation and net ultimate: \( q_{ult} = \gamma D_f N_q + 0.5\gamma B N_\gamma \) (\( c = 0 \)). Net ultimate: \( q_{\text{nu}} = q_{ult} - \gamma D_f \).
Step 3 – Solve:
$$q_{ult} = 17(1)(14.7) + 0.5(17)(1.5)(16.7) = 249.9 + 212.9 = 462.8\,\text{kPa}$$
$$q_{\text{nu}} = 462.8 - 17(1) = 462.8 - 17 = 445.8 \approx 446\,\text{kPa}$$
Step 4 – Answer: \( q_{\text{nu}} \approx 446\,\text{kPa} \) matches option (A). Option (B) is the gross ultimate capacity with the overburden \( \gamma D_f \) never subtracted, which is the quantity the question is not asking for. Option (D) drops the \( 0.5 \) from the \( \gamma B N_\gamma \) term. Option (C) does not follow from the data. The net ultimate capacity removes the overburden contribution that exists before the footing is placed.
Correct answer: (A)
Three Mistakes That Cost Points
- Dropping the one-half in the width term. The self-weight term is \( \tfrac12\gamma B N_\gamma \). Leaving out the \( \tfrac12 \) adds the whole term a second time and overstates \( q_{ult} \) by hundreds of kPa.
- Confusing net and gross capacity. The net ultimate capacity subtracts the overburden pressure \( \gamma D_f \) that was there before the excavation. When the question asks for the net value, the gross one is waiting among the options.
- Stopping at the area of a square footing. For a square footing P/qa is an area; take its square root for the side. 1,800 kN over 200 kPa is 9 m², a 3.0 m square, not a 9 m one.
Frequently Asked Questions
Where do the bearing capacity factors come from?
They depend only on the friction angle and are tabulated in the FE Reference Handbook. Problems often give them, as these do; if not, read them from the table for the stated angle.
What factor of safety is used for bearing capacity?
Use the one the problem gives. Values around 3 are common for shallow foundations, which is why allowable pressures sit well below the ultimate capacity.
Does a water table change the bearing capacity?
Yes. When the water table is close to the footing, the effective unit weight replaces the total unit weight in the terms it affects, and the capacity drops. The problems on this page have no water table.
Keep Going
Practice the rest of the area on the FE Civil geotechnical engineering practice problems page, or keep going with the lateral earth pressure problems, soil phase relationship problems, soil classification problems, and consolidation settlement problems. To see these topics mixed with the other 13 areas, take the free FE Civil practice exam, or browse every topic in the free FE Civil practice problems hub.