Stopping sight distance and superelevation are the two places where speed enters geometric design, the first subtopic of Transportation Engineering on the FE Civil exam. Both rest on short equations that mix miles per hour with feet and feet per second, and that mix is where most points are lost.
The five problems below run from stopping sight distance on a level road and on two downgrades to the minimum radius and the safe speed of a superelevated curve. Each problem states the equation it expects, as many exam items do, and each opens a worked solution after you choose an answer.
Where this sits: NCEES lists Transportation Engineering at 9-14 questions of the 110 on the FE Civil exam, and geometric design (e.g., streets, highways, intersections) is subtopic A of the area. NCEES does not publish question counts below that level.
The Equations These Problems Use
V is in miles per hour, distances in feet, the friction factor f and the grade G as decimals, with G negative on a downgrade.
- Stopping sight distance: \( SSD = 1.47\,V t + \dfrac{V^2}{30\,(f + G)} \)
- Reaction distance alone: \( 1.47\,V t \), where 1.47 converts mph to ft/s
- Minimum radius: \( R = \dfrac{V^2}{15\,(e + f)} \)
- The same relationship solved for e or V: \( e = \dfrac{V^2}{15R} - f \) and \( V = \sqrt{15R\,(e + f)} \)
5 Free Sight Distance and Superelevation Problems
Give yourself about three minutes for each one, roughly the pace of the exam, and work it on paper before you look at the solution.
Problem 1 — Stopping Sight Distance on a Level Road
A vehicle travels at \( V = 50 \,\mathrm{mph} \) on a level grade. Use \( t = 2.5 \,\mathrm{s} \), \( f = 0.35 \), \( G = 0.00 \). Compute \( SSD \) (\( \mathrm{ft} \)) using \( SSD = 1.47Vt + V^2/[30(f+G)] \).
Answer: D) \( 422\,\mathrm{ft} \)
Step 1 – Identify given information:
| Speed | \( V = 50 \;\text{mph} \) |
| Reaction time | \( t = 2.5 \;\text{s} \) |
| Friction factor | \( f = 0.35 \) |
| Grade | \( G = 0.00 \) (level) |
Step 2 – Stopping sight distance formula:
$$SSD = 1.47Vt + \dfrac{V^2}{30(f + G)}$$
Step 3 – Substitute and solve:
$$SSD = 1.47(50)(2.5) + \dfrac{50^2}{30(0.35 + 0)} = 183.8 + \dfrac{2500}{10.5} = 183.8 + 238.1 = 421.9 \;\text{ft} \approx 422 \;\text{ft}$$
Step 4 – Answer: \( SSD \approx 422 \;\text{ft} \). The reaction distance (184 ft) and braking distance (238 ft) combine for the total SSD. On level grade, the braking distance depends only on speed and friction.
Option (A) \( 240 \;\text{ft} \) is the braking distance alone, with the perception-reaction distance \( 1.47Vt \) left out; the two parts are added, never chosen between.
Correct answer: (D)
Problem 2 — Stopping Sight Distance on a 4% Downgrade
Compute stopping sight distance \( SSD \) (\( \mathrm{ft} \)) for a vehicle traveling \( V = 55 \,\mathrm{mph} \) on a \( 4\% \) downgrade. Use reaction time \( t = 2.5 \,\mathrm{s} \) and friction factor \( f = 0.35 \). (Use \( SSD = 1.47Vt + V^2/[30(f+G)] \), with \( G \) = grade as decimal, negative for downgrade.)
Answer: B) \( 527\,\mathrm{ft} \)
Step 1 – Identify given information:
| Speed | \( V = 55 \;\text{mph} \) |
| Grade | \( G = -0.04 \) (4% downgrade) |
| Reaction time | \( t = 2.5 \;\text{s} \) |
| Friction factor | \( f = 0.35 \) |
Step 2 – Stopping sight distance formula: From the AASHTO method:
$$SSD = 1.47Vt + \dfrac{V^2}{30(f + G)}$$
Note: \( G \) is negative for a downgrade, which increases the braking distance.
Step 3 – Substitute and solve:
$$SSD = 1.47(55)(2.5) + \dfrac{55^2}{30(0.35 - 0.04)} = 202.1 + \dfrac{3025}{9.3} = 202.1 + 325.3 = 527.4 \;\text{ft}$$
Step 4 – Answer: \( SSD \approx 527 \;\text{ft} \). The downgrade increases braking distance compared to level grade because gravity opposes deceleration. On a level grade, \( SSD \) would be approximately \( 202 + 288 = 490 \;\text{ft} \).
Correct answer: (B)
Problem 3 — Stopping Sight Distance at 60 mph
A vehicle travels at \( V = 60 \,\mathrm{mph} \) on a \( 3\% \) downgrade. Use \( t = 2.5 \,\mathrm{s} \), \( f = 0.34 \), and take downgrade as \( G = -0.03 \) in \( SSD = 1.47Vt + V^2/[30(f+G)] \). What is \( SSD \) (\( \mathrm{ft} \)), nearest \( 1 \,\mathrm{ft} \)?
Answer: B) \( 608\,\mathrm{ft} \)
Step 1 – Identify given information:
| Speed | \( V = 60 \;\text{mph} \) |
| Reaction time | \( t = 2.5 \;\text{s} \) |
| Friction factor | \( f = 0.34 \) |
| Grade | \( G = -0.03 \) (3% downgrade) |
Step 2 – Stopping sight distance formula:
$$SSD = 1.47Vt + \dfrac{V^2}{30(f + G)}$$
The negative grade reduces the effective friction, increasing braking distance.
Step 3 – Substitute and solve:
$$SSD = 1.47(60)(2.5) + \dfrac{60^2}{30(0.34 - 0.03)} = 220.5 + \dfrac{3{,}600}{9.3} = 220.5 + 387.1 = 607.6 \;\text{ft}$$
Rounding to nearest answer: \( \approx 585 \;\text{ft} \)
Step 4 – Answer: \( SSD = 608 \;\text{ft} \) (\( 220.5 + 387.1 \), to the nearest foot). The downgrade increases the required SSD significantly compared to level grade because gravity acts against braking deceleration.
Correct answer: (B)
Problem 4 — Minimum Radius for a Design Speed
What is the minimum horizontal curve radius \( R \) (\( \mathrm{ft} \)) for \( V = 60\,\mathrm{mph} \) if superelevation \( e = 0.06 \) and side friction \( f = 0.12 \)? (Use \( R = V^2/[15(e+f)] \).)
Answer: D) \( 1330\,\mathrm{ft} \)
Step 1 – Identify given information:
| Design speed | \( V = 60 \;\text{mph} \) |
| Superelevation | \( e = 0.06 \) |
| Side friction | \( f = 0.12 \) |
Step 2 – Minimum radius formula: From the AASHTO point-mass model for vehicles on a curve:
$$R = \dfrac{V^2}{15(e + f)}$$
Step 3 – Substitute and solve:
$$R = \dfrac{60^2}{15(0.06 + 0.12)} = \dfrac{3600}{15(0.18)} = \dfrac{3600}{2.7} = 1333 \;\text{ft} \approx 1330 \;\text{ft}$$
Step 4 – Answer: \( R \approx 1330 \;\text{ft} \). Any radius smaller than this would require either higher superelevation, more friction, or a reduced speed to maintain safety.
(A) \( 620\,\text{ft} \) uses the gravitational form \( R = V^2/[g(e+f)] \) but leaves the design speed in miles per hour; the \( 15 \) in the Handbook's relation already carries that unit conversion.
(B) \( 950\,\text{ft} \) and (C) \( 1200\,\text{ft} \) follow from neither form.
Correct answer: (D)
Problem 5 — Maximum Speed on a Superelevated Curve
A horizontal curve has radius \( R = 750 \,\mathrm{ft} \) with superelevation \( e = 0.08 \) and side friction \( f = 0.15 \). What is the maximum speed \( V \) (\( \mathrm{mph} \)), nearest \( 1 \,\mathrm{mph} \)? (Use \( V = \sqrt{15R(e+f)} \).)
Answer: C) \( 51\,\mathrm{mph} \)
Step 1 – Identify given information:
| Radius | \( R = 750 \;\text{ft} \) |
| Superelevation | \( e = 0.08 \) |
| Side friction | \( f = 0.15 \) |
Step 2 – Maximum speed formula: Solving \( R = V^2/[15(e+f)] \) for \( V \):
$$V = \sqrt{15R(e + f)}$$
Step 3 – Substitute and solve:
$$V = \sqrt{15 \times 750 \times (0.08 + 0.15)} = \sqrt{15 \times 750 \times 0.23} = \sqrt{2587.5} = 50.9 \;\text{mph} \approx 51 \;\text{mph}$$
Step 4 – Answer: \( V \approx 51 \;\text{mph} \). Exceeding this speed on the curve would require more friction than available, risking loss of control.
(A) \( 30\,\text{mph} \) uses the balanced-superelevation form and never adds the side-friction factor, so \( f \) is missing from the radicand entirely.
(B) \( 44\,\text{mph} \) and (D) \( 57\,\text{mph} \) follow from neither.
Correct answer: (C)
Three Mistakes That Cost Points
- Dropping the 1.47 in the reaction term. Speed comes in mph but the distance needs feet per second, and 1.47 V t makes that conversion. Without it the reaction distance comes out about a third too short and matches a distractor.
- Entering the grade as a percent or with the wrong sign. A 3% downgrade is G = −0.03 in the braking term. Entered as −3 the denominator turns negative; entered as +0.03 the distance shrinks on a downgrade, where it should grow.
- Using superelevation in percent. In 15(e + f) a 6% superelevation is 0.06. The same care applies when the problem asks for e: a result of 0.072 is a 7.2% superelevation.
Frequently Asked Questions
What reaction time does the FE exam use for stopping sight distance?
Use the one the problem gives. US design practice uses 2.5 seconds for perception and reaction, and the problems on this page state it, so read the stem before you reach for a default.
Why does a downgrade increase stopping sight distance?
Gravity works against the brakes, so the braking term V squared over 30(f + G) has a smaller denominator when G is negative. The reaction distance does not depend on the grade at all.
Does a curve without superelevation need a larger radius?
Yes. With e equal to zero the side friction alone keeps the vehicle on the curve, so for the same speed and friction the minimum radius grows. Superelevation lets a tighter curve carry the same speed.
Keep Going
Practice the rest of the area on the FE Civil transportation engineering practice problems page, or keep going with the horizontal and vertical curve problems. To see these topics mixed with the other 13 areas, take the free FE Civil practice exam, or browse every topic in the free FE Civil practice problems hub.