How hard is the FE exam? There are two honest answers. The short one is a number: most first-time takers pass it, and about a third of the people who sit it again do. The useful one is a description of where the difficulty actually sits, because it is not where most candidates expect. This page gives both, with NCEES’s own figures for every discipline.
Short answer: the FE is a hard exam that most first-time takers pass. In NCEES’s latest report (2024–25 exam year), 64% of first-time takers passed across the seven disciplines, and 33% of repeat takers. It is not hard because any one question is deep. It is hard because 110 questions cover 14 to 17 subjects in one sitting, and the score rewards breadth.
What makes the FE exam hard
Breadth, not depth
Each FE exam is a list of knowledge areas with a range of questions for each, published by NCEES: 14 areas for FE Civil, 14 for FE Mechanical and 17 for FE Electrical and Computer. On FE Civil, Structural, Geotechnical and Water Resources and Environmental Engineering carry 10 to 15 questions each; on FE Mechanical, Thermodynamics, Fluid Mechanics and Mechanical Design and Analysis carry 10 to 15; on FE Electrical, Mathematics and Circuit Analysis carry 11 to 17 each. Most questions are at the level of an undergraduate course. The difficulty is having every course ready on the same day, including the ones you took in your second year.
The clock
110 questions in 5 h 20 min of exam time is just under three minutes a question, with a scheduled break. That is enough for a question you know how to start and not enough for one you have to work out from first principles. Running out of time is rarely a knowledge problem; it usually comes from a few questions that should have been flagged and left for later.
One reference, on screen
The only reference is the NCEES FE Reference Handbook, a searchable PDF next to the questions. It has most of the equations you need, which is why it does not feel like a help on exam day unless you have practised with it: knowing which section, which table and which conditions apply is a skill, and it costs minutes when it is missing. The guide to using the FE Reference Handbook covers how to practise with it.
No target score
NCEES reports the FE as pass or fail. The score is the number of correct answers, converted to a scaled score that adjusts for differences between forms, and NCEES does not publish the passing score. Rules like “you need 70%” have no official basis, so the only safe plan is to prepare every area, not to calculate how many you can skip.
The numbers: pass rates by discipline
By first-time pass rate, the hardest FE exams in NCEES’s 2024–25 report were FE Civil and FE Other Disciplines, at 61% each; FE Mechanical had the highest rate, 69%, and FE Electrical and Computer was in the middle at 64%. Read that with care: each exam has its own pool of candidates, and FE Civil alone had 16,639 first-time takers, four in ten of all first attempts. A lower rate says the pool cleared the bar less often, not that the exam will be harder for you.
View the data as a table
| FE Discipline | First-time takers | Repeat takers | First-time volume |
|---|---|---|---|
| FE Mechanical | 69% | 37% | 11,552 |
| FE Chemical | 68% | 35% | 1,873 |
| FE Environmental | 67% | 37% | 2,543 |
| FE Electrical and Computer | 64% | 31% | 5,882 |
| FE Industrial and Systems | 62% | 25% | 547 |
| FE Civil | 61% | 32% | 16,639 |
| FE Other Disciplines | 61% | 29% | 2,386 |
| All disciplines (weighted) | 64% | 33% | 41,422 |
The full tables, with the split by degree and the trend since 2018–19, are on the FE exam pass rates page and the FE Civil, FE Mechanical and FE Electrical pages.
Who finds it hardest: degree, attempt and timing
The splits NCEES publishes say more about difficulty than the headline does, because they show which candidates struggle. Three stand out.
The degree. First-time takers with a bachelor’s degree from an EAC/ABET-accredited engineering program pass at the highest rates; other takers, a group that mixes non-accredited and foreign programs with people who did not report a degree, pass less often; and graduates of ETAC/ABET engineering technology programs pass at about half the EAC rate. NCEES gives no reason for the gaps.
| FE exam (2024–25) | First time, EAC/ABET | First time, other | First time, ETAC/ABET | Repeat, all |
|---|---|---|---|---|
| FE Civil | 64% | 53% | 32% | 32% |
| FE Mechanical | 72% | 59% | 33% | 37% |
| FE Electrical and Computer | 67% | 55% | 34% | 31% |
The attempt. Repeat takers pass at roughly half the first-time rate, or less, in every discipline, 33% against 64% overall, although NCEES grades both to the same standard. The exam does not get harder the second time. The candidates who come back are, on average, the ones whose first preparation did not work, which is why changing the preparation matters more than the retake itself.
The timing. NCEES’s 2025 report follows first-time takers from ABET-accredited programs by when they sat the exam: 71.34% passed before graduating, 70.62% within 12 months of graduating and 63.43% after waiting 12 months or more (member boards only, data from 2014 to 2025). The FE tests coursework, and coursework fades: the same exam is measurably harder a year after school.
Is the FE harder than the PE?
They are hard in different ways. The FE is broad and close to the undergraduate curriculum; the PE is narrower, deeper and written for engineers with at least four years of experience in their discipline. The PE is generally considered the harder of the two, and the FE is the step you take first. The FE vs PE comparison lays out the differences in format, eligibility and cost.
How long it takes to prepare
NCEES publishes no data on study time, and the hour counts quoted online are rules of thumb. The data above points at the variables that matter: how recently you studied the material, whether your program covered every knowledge area, and whether you have practised under the clock with the Handbook. A recent graduate of an accredited program usually needs less than someone five years out of school. The guide to how long to study for the FE works through a plan by situation, and the day-by-day planning guide shows how to build the calendar.
How to make the FE easier
- Find your weak areas first. A short diagnostic beats a guess: the FE Civil, FE Mechanical and FE Electrical diagnostics are 8 questions each.
- Size the plan from the NCEES ranges. The areas with the most questions deserve the most time; the FE Civil topics, FE Mechanical topics and FE Electrical areas guides list every range.
- Practise with the Handbook open. Every session, so that finding an equation on exam day is a reflex.
- Take timed practice exams. Start with a free FE practice exam (20 questions, the real interface), then full 110-question simulations in the last weeks.
- Sit it soon after school if you can. The timing split above is the one factor in NCEES’s data you control by choosing the date.
Start with a free practice exam
20 timed questions in the computer-based format of the real exam, every NCEES knowledge area, your score by topic and a worked solution for every question. FE Civil, FE Mechanical or FE Electrical, no account needed.
Take a Free Practice ExamDifficulty by discipline
The FE Civil difficulty guide goes topic by topic through the 14 FE Civil areas. For FE Mechanical and FE Electrical, the FE Mechanical topics guide and the FE Electrical and Computer guide explain what each area really tests.
Frequently asked questions
Is the FE exam hard?
Yes, mostly because of its breadth: 110 questions across 14 to 17 knowledge areas in 5 h 20 min, with only the FE Reference Handbook to look things up. Most prepared first-time takers pass: 64% across the seven disciplines in NCEES’s 2024–25 report.
What percentage of people pass the FE exam?
In NCEES’s 2024–25 exam year, 64% of first-time takers and 33% of repeat takers passed, weighted across the seven disciplines; first-time rates ran from 61% (Civil and Other Disciplines) to 69% (Mechanical).
Which FE exam is the hardest?
By first-time pass rate, FE Civil and FE Other Disciplines (61% each in 2024–25); FE Mechanical had the highest rate (69%). The pools differ, so a lower rate is not proof that one exam is harder for you.
Does it matter when I take the FE exam?
NCEES’s data says yes: first-time takers from ABET-accredited programs passed at 71.34% before graduating and 70.62% within 12 months of graduating, against 63.43% when they waited a year or more.
How many times can you take the FE exam?
NCEES allows one attempt per testing window and no more than three attempts in a 12-month period.
Sources: NCEES, Squared 2025 (FE pass rates for the 2024–25 exam year, pass rates by time of graduation); NCEES, FE exam; NCEES, Examinee Guide (scoring, pass/fail reporting, attempt limits); NCEES exam specifications for FE Civil, FE Mechanical and FE Electrical and Computer (effective July 2020).