Basic hydrology is subtopic A of Water Resources and Environmental Engineering on the FE Civil exam: how much of a storm becomes runoff, how quickly it peaks, and how often a storm that size comes. The questions use a small set of methods, mostly in US units of acres, inches and cubic feet per second.

The five problems below cover the rational method for a composite area, the SCS curve number method, the volume under a runoff hydrograph, a time of concentration from a travel velocity, and the chance that a design storm is exceeded during a project's life.

Where this sits: NCEES lists Water Resources and Environmental Engineering at 10-15 questions of the 110 on the FE Civil exam, and basic hydrology (e.g., infiltration, rainfall, runoff, watersheds) is subtopic A of the area. NCEES does not publish question counts below that level.

The Hydrology Relationships These Problems Use

The FE Reference Handbook covers both runoff methods; for the rational method Q is in cfs, i in in/hr and A in acres.

5 Free Hydrology and Runoff Problems

Give yourself about three minutes for each one, roughly the pace of the exam, and work it on paper before you look at the solution.

Problem 1 — Time of Concentration

A flow path length to the outlet is \( 2{,}500\,\mathrm{ft} \). If average travel velocity is \( 3.5\,\mathrm{ft/s} \), estimate the time of concentration \( t_c \).

Answer: A) \( 12\,\mathrm{min} \)

Step 1 – Identify given information:

Flow path length \( L = 2{,}500 \) ft, average travel velocity \( v = 3.5 \) ft/s.

Step 2 – Time of concentration formula:

$$t_c = \frac{L}{v}$$

Step 3 – Solve:

$$t_c = \frac{2{,}500}{3.5} = 714.3 \;\text{s} = \frac{714.3}{60} = 11.9 \;\text{min}$$

Step 4 – Answer: \( t_c \approx 12 \) min. This simple velocity-based approach is one of several methods to estimate \( t_c \). The FE Handbook also presents the Kirpich and NRCS methods for sheet flow.

Dividing the 11.9 min travel time by 0.6 confuses lag time with time of concentration — L/v already gives t_c directly, and the NRCS relation t_lag = 0.6 t_c is not applied here.

Correct answer: (A)

Problem 2 — Rational Method for Two Areas

Two adjacent drainage areas flow to the same inlet: Area 1 = \( 3\,\mathrm{ac} \) with \( C = 0.30 \) and Area 2 = \( 5\,\mathrm{ac} \) with \( C = 0.70 \). For a storm intensity of \( 4.0\,\mathrm{in/hr} \), what is the peak runoff \( Q \) using the rational method?

Figure for FE Civil practice problem 2 (Water Resources and Environmental Engineering)

Answer: D) \( 18\,\mathrm{ft}^3/\mathrm{s} \)

Step 1 – Identify the given information:

AreaSize (ac)Runoff Coeff. (C)
130.30
250.70
Total8—

Storm intensity: \( i = 4.0 \;\text{in/hr} \)

Step 2 – Recall the Rational Method formula (from the FE Handbook):

$$Q = C \cdot i \cdot A$$

where \( Q \) = peak runoff (ft\(^{3}\)/s), \( C \) = runoff coefficient, \( i \) = intensity (in/hr), \( A \) = area (ac).
Note: When \( C \) is dimensionless, \( i \) in in/hr, and \( A \) in acres, \( Q \) comes out directly in ft\(^{3}\)/s (because 1 ac·in/hr ≈ 1.008 ft\(^{3}\)/s ≈ 1 cfs).

Step 3 – Calculate the weighted runoff coefficient:

$$C_{\text{weighted}} = \frac{C_1 A_1 + C_2 A_2}{A_{\text{total}}} = \frac{(0.30)(3) + (0.70)(5)}{8} = \frac{0.90 + 3.50}{8} = \frac{4.40}{8} = 0.55$$

Step 4 – Compute peak runoff:

$$Q = C_{\text{weighted}} \cdot i \cdot A_{\text{total}} = 0.55 \times 4.0 \times 8 = 17.6 \approx 18 \;\text{ft}^3\text{/s}$$

(C) \( 16\,\text{cfs} \) takes a plain average of the two runoff coefficients, \( (0.30 + 0.70)/2 = 0.50 \), instead of weighting them by drainage area.
(B) \( 14\,\text{cfs} \) is the second area on its own, \( 0.70 \times 4.0 \times 5 \), with the first ignored.
(A) \( 9\,\text{cfs} \) implies a weighted coefficient near \( 0.28 \), below the lower of the two given.

Correct answer: (D)

Problem 3 — Runoff Depth by Curve Number

Using the SCS Curve Number method with \( CN = 75 \) and storm depth \( P = 4.0\,\mathrm{in} \), what is the direct runoff depth \( Q \)?

Answer: B) \( 1.7\,\mathrm{in} \)

Step 1 – Identify given information:

\( CN = 75 \), storm depth \( P = 4.0 \) in.

Step 2 – SCS Curve Number formulas (FE Handbook):

\( S = \frac{1000}{CN} - 10 \), \( I_a = 0.2S \), \( Q = \frac{(P - I_a)^2}{P - I_a + S} \) (valid when \( P > I_a \))

Step 3 – Solve step by step:

$$S = \frac{1000}{75} - 10 = 13.333 - 10 = 3.333 \;\text{in}$$

$$I_a = 0.2 \times 3.333 = 0.667 \;\text{in}$$

Since \( P = 4.0 > I_a = 0.667 \):

$$Q = \frac{(4.0 - 0.667)^2}{(4.0 - 0.667) + 3.333} = \frac{(3.333)^2}{3.333 + 3.333} = \frac{11.11}{6.667} = 1.67 \;\text{in}$$

Step 4 – Answer: \( Q \approx 1.7 \) in. With CN = 75 (moderate imperviousness), about 42% of the 4-inch rainfall becomes runoff. Option (A) 0.9 in would require a lower CN; option (D) 3.3 in would require CN near 98.

Correct answer: (B)

Problem 4 — Volume of a Triangular Hydrograph

A triangular direct-runoff hydrograph has a peak of \( 500\,\mathrm{cfs} \) and a base duration of \( 6\,\mathrm{hours} \). What is the runoff volume?

Figure for FE Civil practice problem 4 (Water Resources and Environmental Engineering)

Answer: C) \( 124\,\mathrm{ac{\text{-}}ft} \)

Step 1 – Identify given information:

Triangular hydrograph: peak \( Q_p = 500 \) cfs, base duration \( t_b = 6 \) hr.

Step 2 – Volume under a triangular hydrograph:

$$V = \frac{1}{2} \times t_b \times Q_p$$

Step 3 – Solve:

$$t_b = 6 \;\text{hr} \times 3600 \;\text{s/hr} = 21{,}600 \;\text{s}$$

$$V = \frac{1}{2} \times 21{,}600 \times 500 = 5{,}400{,}000 \;\text{ft}^3$$

Convert to ac-ft (1 ac-ft = 43,560 ft\(^3\)):

$$V = \frac{5{,}400{,}000}{43{,}560} = 124.0 \;\text{ac-ft}$$

Step 4 – Answer: \( V \approx 124 \) ac-ft. The triangular approximation is commonly used in the SCS synthetic unit hydrograph. Half the base times the peak gives the area under the triangle.

(B) \( 83\,\text{ac-ft} \) uses a one-third factor, as a cone needs, instead of the one half a triangle needs.
(A) \( 62\,\text{ac-ft} \) halves the answer a second time.
(D) \( 200\,\text{ac-ft} \) implies an average flow four fifths of the peak; the average of a triangle is exactly half its peak, and the full rectangle would be \( 248\,\text{ac-ft} \).

Correct answer: (C)

Problem 5 — Risk of a 50-Year Storm

For a 50-year storm, what is the probability of at least one exceedance occurring in the next 10 years? A \( T \)-year storm has an annual exceedance probability of \( 1/T \), and the probability of at least one exceedance in \( n \) independent years is \( P = 1 - (1 - 1/T)^{n} \).

Answer: C) 0.18

Step 1 – Identify given information:

Return period \( T = 50 \) years, design life \( n = 10 \) years.

Step 2 – Exceedance probability formula (FE Handbook):

Probability of at least one exceedance in \( n \) years:

$$P = 1 - \left(1 - \frac{1}{T}\right)^n$$

Step 3 – Solve:

$$P = 1 - \left(1 - \frac{1}{50}\right)^{10} = 1 - \left(\frac{49}{50}\right)^{10} = 1 - (0.98)^{10} = 1 - 0.817 = 0.183$$

Step 4 – Answer: \( P \approx 0.18 \) (18%). There is roughly an 18% chance the 50-year storm will be equaled or exceeded at least once in a 10-year period. Option (A) 0.02 is the annual exceedance probability, not the 10-year risk.

(B) \( 0.10 \) mistakes the 10-year design life for the return period and quotes \( 1/10 \).
(A) \( 0.02 \) is the ANNUAL exceedance probability, \( 1/50 \), not the risk accumulated over ten years.
(D) \( 0.82 \) is the probability of NO exceedance in ten years, \( 0.98^{10} \), which is the complement of the answer.

Correct answer: (C)

Three Mistakes That Cost Points

Frequently Asked Questions

When do I use the rational method and when the curve number method?

The rational method gives a peak flow for a small drainage area from a rainfall intensity. The curve number method gives a runoff depth or volume from a storm depth. The question usually tells you which by what it gives and what it asks for.

What is the time of concentration?

The time water takes to travel from the hydraulically most distant point of the watershed to the outlet. In the rational method the design intensity is read for a storm lasting that long.

Does the 0.2S initial abstraction always apply?

In the standard curve number method, yes: no runoff occurs until the storm depth exceeds 0.2S. A problem that states another initial abstraction overrides that default.

Keep Going

Practice the rest of the area on the FE Civil water resources and environmental engineering practice problems page, or keep going with the bernoulli and pipe flow problems. To see these topics mixed with the other 13 areas, take the free FE Civil practice exam, or browse every topic in the free FE Civil practice problems hub.