Area computations are subtopic B of Surveying on the FE Civil exam. A parcel's corners come as coordinates, an irregular boundary comes as offsets at equal spacing, and the answer is an area in square feet or acres.
The five problems below, in US units, use the coordinate method on two polygons, the trapezoidal rule, Simpson's 1/3 rule and a conversion to acres.
Where this sits: NCEES lists Surveying at 6-9 questions of the 110 on the FE Civil exam, and area computations is subtopic B of the area. NCEES does not publish question counts below that level.
The Area Relationships These Problems Use
The FE Reference Handbook gives these; w is the common spacing of the offsets \( h_1 \) to \( h_n \).
- Area by coordinates: \( A = \tfrac12\left|\sum (x_i\,y_{i+1} - x_{i+1}\,y_i)\right| \), taking the corners in order around the parcel
- Trapezoidal rule: \( A = w\left[\dfrac{h_1 + h_n}{2} + h_2 + \dots + h_{n-1}\right] \)
- Simpson's 1/3 rule: \( A = \dfrac{w}{3}\left[h_1 + 4(h_2 + h_4 + \dots) + 2(h_3 + h_5 + \dots) + h_n\right] \), with an odd number of offsets
- Acres: 1 acre = 43,560 ft2
5 Free Area Computation Problems
Give yourself about three minutes for each one, roughly the pace of the exam, and work it on paper before you look at the solution.
Problem 1 — Parcel Area in Acres
A parcel is a rectangle \( 330\,\mathrm{ft} \) by \( 264\,\mathrm{ft} \). What is its area in acres? (\( 1\,\mathrm{acre} = 43{,}560\,\mathrm{ft}^2 \))
Answer: C) 2.0 acres
Step 1 – Area:
$$A = 330 \times 264 = 87{,}120 \text{ ft}^2$$
Step 2 – Convert:
$$\text{Acres} = \frac{87{,}120}{43{,}560} = 2.00$$
(A) 1.0 acre applies the halving factor from the traverse-area formula on top of a straight length-times-width product, which a rectangle does not need.
(B) 1.5 acres and (D) 2.5 acres correspond to \( 65{,}340\,\text{ft}^2 \) and \( 108{,}900\,\text{ft}^2 \), and neither is \( 330 \times 264 \).
Correct answer: (C)
Problem 2 — Trapezoidal Rule
Trapezoidal Rule: \( w = 10\,\mathrm{ft} \), ordinates (ft) are \( h_1 = 2 \), \( h_2 = 4 \), \( h_3 = 3 \), \( h_4 = 5 \), \( h_5 = 1 \). What is the area \( (\mathrm{ft}^2) \)?
Answer: D) \( 135\,\mathrm{ft}^2 \)
Step 1 – Identify given information:
| Ordinate | \( h_1 \) | \( h_2 \) | \( h_3 \) | \( h_4 \) | \( h_5 \) |
|---|---|---|---|---|---|
| Value (ft) | 2 | 4 | 3 | 5 | 1 |
Step 2 – Trapezoidal Rule (FE Handbook):
\( A = w\left[\dfrac{h_1 + h_n}{2} + h_2 + h_3 + \cdots + h_{n-1}\right] \)
The first and last ordinates are halved; all interior ordinates are at full value.
Step 3 – Substitute and solve:
\( A = 10\left[\dfrac{2 + 1}{2} + (4 + 3 + 5)\right] = 10\left[1.5 + 12\right] = 10 \times 13.5 = 135\,\text{ft}^2 \)
Step 4 – Answer:
The area is \( 135\,\text{ft}^2 \).
(B) \( 115\,\text{ft}^2 \) underestimates by omitting an interior ordinate.
(C) \( 125\,\text{ft}^2 \) and (D) \( 145\,\text{ft}^2 \) do not match the trapezoidal rule calculation.
Tip: The trapezoidal rule works for any number of equally spaced ordinates.
Stopping the trapezoidal rule one ordinate early — halving h4 as if it were the last reading and leaving h5 out of the sum — gives 105 ft² instead of 135 ft².
Correct answer: (D)
Problem 3 — Polygon by Coordinates
Find the area \( (\mathrm{ft}^2) \) of the polygon with vertices in order: \( (0,0) \), \( (60,0) \), \( (60,20) \), \( (20,30) \), \( (0,20) \).
Answer: C) \( 1{,}500\,\mathrm{ft}^2 \)
Step 1 – Identify given information:
Polygon vertices in order: \( (0,0) \), \( (60,0) \), \( (60,20) \), \( (20,30) \), \( (0,20) \).
Step 2 – Coordinate (Shoelace) method (FE Handbook):
\( A = \dfrac{1}{2}\left|\sum_{i=1}^{n}(x_i y_{i+1} - x_{i+1} y_i)\right| \)
List the coordinates in order, closing back to the first point.
Step 3 – Substitute and solve:
\( \sum(x_i y_{i+1}) = (0)(0) + (60)(20) + (60)(30) + (20)(20) + (0)(0) \)
\( = 0 + 1{,}200 + 1{,}800 + 400 + 0 = 3{,}400 \)
\( \sum(x_{i+1} y_i) = (60)(0) + (60)(0) + (20)(20) + (0)(30) + (0)(20) \)
\( = 0 + 0 + 400 + 0 + 0 = 400 \)
\( A = \dfrac{1}{2}|3{,}400 - 400| = \dfrac{1}{2}(3{,}000) = 1{,}500\,\text{ft}^2 \)
Step 4 – Answer:
The polygon area is \( 1{,}500\,\text{ft}^2 \).
(A) \( 1{,}000\,\text{ft}^2 \) treats the boundary offsets as evenly spaced when the second interval is twice the first, which drops a \( 500\,\text{ft}^2 \) strip.
(B) \( 1{,}200\,\text{ft}^2 \) underestimates the irregular shape.
(D) \( 1{,}800\,\text{ft}^2 \) overestimates it.
The shoelace method works for any simple polygon, provided the vertices are taken in perimeter order.
Correct answer: (C)
Problem 4 — Five-Sided Parcel by Coordinates
A five-sided parcel has corner coordinates (in ft): \( A(10,10) \), \( B(70,20) \), \( C(90,60) \), \( D(50,90) \), \( E(20,50) \). Using the Area by Coordinates (coordinate) method, what is the enclosed area in \( \mathrm{ft}^2 \)?
Answer: A) \( 3{,}700\,\mathrm{ft}^2 \)
Step 1 – Corner coordinates (traverse order, close E back to A):
| Corner | X (ft) | Y (ft) |
|---|---|---|
| A | 10 | 10 |
| B | 70 | 20 |
| C | 90 | 60 |
| D | 50 | 90 |
| E | 20 | 50 |
Step 2 – Area by Coordinates (shoelace), FE Handbook:
\( A = \frac{1}{2}\left|\sum (x_i\,y_{i+1} - x_{i+1}\,y_i)\right| \)
Step 3 – Cross-products (wrap E→A):
\( (10)(20)-(70)(10) = -500 \)
\( (70)(60)-(90)(20) = +2{,}400 \)
\( (90)(90)-(50)(60) = +5{,}100 \)
\( (50)(50)-(20)(90) = +700 \)
\( (20)(10)-(10)(50) = -300 \)
Sum \( = 7{,}400 \)
Step 4 – Area:
\( A = \tfrac{1}{2}\,|7{,}400| = 3{,}700\,\text{ft}^2 \)
(B) \( 4{,}500\,\text{ft}^2 \) takes the absolute value of each cross-product before summing instead of once at the end, which flips the two negative terms and inflates the total from \( 7{,}400 \) to \( 9{,}000 \).
(C) \( 6{,}400\,\text{ft}^2 \) overestimates: the cross-products sum to \( 7{,}400 \) and half of that is \( 3{,}700 \).
(D) \( 7{,}400\,\text{ft}^2 \) is the sum itself, with the factor of one half never applied.
Correct answer: (A)
Problem 5 — Simpson's 1/3 Rule
Simpson's 1/3 Rule: \( w = 5\,\mathrm{ft} \), ordinates are \( 3,\, 5,\, 4,\, 6,\, 5,\, 4,\, 3 \). What is the area \( (\mathrm{ft}^2) \)?
Answer: D) \( 140\,\mathrm{ft}^2 \)
Step 1 – Identify given information:
| Ordinate | \( h_1 \) | \( h_2 \) | \( h_3 \) | \( h_4 \) | \( h_5 \) | \( h_6 \) | \( h_7 \) |
|---|---|---|---|---|---|---|---|
| Value (ft) | 3 | 5 | 4 | 6 | 5 | 4 | 3 |
Step 2 – Simpson's 1/3 Rule (FE Handbook):
\( A = \dfrac{w}{3}[h_1 + h_n + 4(h_2 + h_4 + h_6) + 2(h_3 + h_5)] \)
Multiplier pattern: 1, 4, 2, 4, 2, 4, 1.
Step 3 – Substitute and solve:
\( A = \dfrac{5}{3}[3 + 3 + 4(5 + 6 + 4) + 2(4 + 5)] \)
\( = \dfrac{5}{3}[6 + 4(15) + 2(9)] = \dfrac{5}{3}[6 + 60 + 18] = \dfrac{5}{3}(84) = 140\,\text{ft}^2 \)
Step 4 – Answer:
The area is \( 140\,\text{ft}^2 \).
(A) \( 110\,\text{ft}^2 \) leaves the odd-position interior ordinates out altogether instead of weighting them 2, losing \( 30\,\text{ft}^2 \).
(B) \( 120\,\text{ft}^2 \) underestimates the curved boundary.
(C) \( 130\,\text{ft}^2 \) follows from an incorrect coefficient assignment.
Correct answer: (D)
Three Mistakes That Cost Points
- Taking the corners out of order. The coordinate method needs the corners in sequence around the boundary. Skipping around crosses the polygon over itself, and the cross-products no longer add up to its area.
- Using Simpson's rule on an even number of offsets. Simpson's 1/3 rule needs an even number of intervals, which means an odd number of offsets. With an even count, use the trapezoidal rule or treat the last interval on its own.
- Weighting every offset the same. In the trapezoidal rule the two end offsets count half; in Simpson's rule the interior offsets alternate between 4 and 2. Equal weights give a plain average that matches neither.
Frequently Asked Questions
Should I use coordinates or double meridian distances?
Either gives the same area. The coordinate method is quicker when coordinates are given, as in these problems; double meridian distances work from the latitudes and departures of a traverse.
Is Simpson's rule always more accurate than the trapezoidal rule?
For a smoothly curving boundary, yes, because it fits parabolas through the offsets instead of straight lines. For a boundary made of straight segments the trapezoidal rule is already exact.
Why does the coordinate formula take an absolute value?
Going around the parcel clockwise gives a negative sum and counterclockwise a positive one. The area is the same either way, so take the magnitude.
Keep Going
Practice the rest of the area on the FE Civil surveying practice problems page, or keep going with the earthwork volume problems. To see these topics mixed with the other 13 areas, take the free FE Civil practice exam, or browse every topic in the free FE Civil practice problems hub.